Loading
LOADING IMAGES
product photo product drawing

PCD / DEB

PCD Tipped Ball Nose End Mill 
A straight flute PCD tipped ball nose end mill available in 1 or 2 flutes depending on tool size.  These end mills combine a PCD tip with a carbide body for maximum rigidity and optimal performance.  Offers excellent results in CFRP (Carbon-Fiber-Reinforced Polymer), fiberglass, aluminum and other very abrasive materials.

  • 1 or 2 flute options
  • Straight flute
  • Center cutting
  • Ball Nose
  • PCD tipped with a carbide body
  • Inch and metric sizes
*This series has been obsoleted.  Tools with stock will be available until the stock is depleted and cannot be returned.  Contact customer service if you require an obsolete tool as a special.

Materials

  • Non-Ferrous

Applications

  • High Efficiency Milling
  • Slotting
  • Traditional Roughing
  • 3D Surfacing
  • Finishing

Series Attributes

Product Range

Tool No. EDP Diameter (D/D1) Shank Diameter (D2) Overall Length (L1) Flute Length (L2) Neck Length (L3) Chamfer Coating Shank Type # Flutes RH
.1181 DE1BM0300 90126 3mm 3mm 38mm 6mm 15mm Uncoated Straight 1
.1250 DE1B1250 90119 1/8 1/8 1-1/2 1/4 5/8 Uncoated Straight 1
.1575 DE1BM0400 90127 4mm 4mm 50mm 6mm 17mm Uncoated Straight 1
.1875 DE1B1875 90120 3/16 3/16 2 5/16 7/8 Uncoated Straight 1
.1968 DE1BM0500 90128 5mm 5mm 50mm 8mm 20mm Uncoated Straight 1
.2362 DE2BM0600 90129 6mm 6mm 64mm 10mm 24mm Uncoated Straight 2
.2500 DE2B2500 90121 1/4 1/4 2 3/8 7/8 Uncoated Straight 2
.3150 DE2BM0800 90130 8mm 8mm 64mm 10mm 27mm Uncoated Straight 2
.3750 DE2B3750 90122 3/8 3/8 2-1/2 1/2 1 Uncoated Straight 2
.3937 DE2BM1000 90131 10mm 10mm 75mm 15mm 35mm Uncoated Straight 2
.4724 DE2BM1200 90132 12mm 12mm 75mm 15mm 35mm Uncoated Straight 2
.6250 DE2B6250 90124 5/8 5/8 3-1/4 7/8 1-3/4 Uncoated Straight 2
.6299 DE2BM1600 90133 16mm 16mm 92mm 20mm 42mm Uncoated Straight 2
.7500 DE2B7500 90125 3/4 3/4 4 1 2 Uncoated Straight 2
.7874 DE2BM2000 90134 20mm 20mm 100mm 25mm 50mm Uncoated Straight 2