Countersinks - Series 60

Carbide Uniflute® Countersink
Recommended for use on abrasive, non-metallic and non-ferrous materials. May be used on hardened steel and work hardening alloys.
  • Single flute
  • Solid carbide 1/8 - 1/4" sizes
  • Solid carbide head brazed to steel shank on sizes 3/8" and above
  • Available with 60°, 82°, 90° and 100° included angles
  • Easily resharpened
  • Rigid set-ups and good machinery maintenance are a must
  • Not recommended for use in hand-held tools
  • Standard angles may be modified from 55° to 99°
  • Material Applications: Steels, Hardened Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, and Non-Ferrous
Tool EDP Diameter Shank Diameter Oal Available Price
60075001 60101 3/4 1/2 3
60050001 60081 1/2 1/4 2-3/8
60025002 60046 1/4 1/4 2
60025001 60041 1/4 1/4 2
60018702 60026 3/16 3/16 1-1/2
60037503 60071 3/8 1/4 2
60025004 60056 1/4 1/4 2
60012503 60011 1/8 1/8 1-1/2
60100002 60126 1 1/2 3
60050004 60096 1/2 1/4 2-3/8
60037504 60076 3/8 1/4 2
60075003 60111 3/4 1/2 3
60025003 60051 1/4 1/4 2
60050003 60091 1/2 1/4 2-3/8
60018701 60021 3/16 3/16 1-1/2
60075004 60116 3/4 1/2 3
60100003 60131 1 1/2 3
60037501 60061 3/8 1/4 2
60075002 60106 3/4 1/2 3
60037502 60066 3/8 1/4 2
60012502 60006 1/8 1/8 1-1/2
60012501 60001 1/8 1/8 1-1/2
60100004 60136 1 1/2 3
60012504 60016 1/8 1/8 1-1/2
60100001 60121 1 1/2 3
60050002 60086 1/2 1/4 2-3/8
60018704 60036 3/16 3/16 1-1/2
60018703 60031 3/16 3/16 1-1/2