TuffCut® End Mills - Series 123

Solid Carbide TuffCut® GP 2 Flute End Mill
Designed for deep pocket milling and other applications where standard flute lengths are too short.
  • 2 Flute
  • Solid carbide
  • Uncoated
  • General purpose milling of most materials
  • Center cutting
  • Long flute length
  • Square end
  • 30° Helix angle
  • For roughing and finishing applications
  • Material Applications: Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Hardened Steels, Non-Ferrous
       Speed and Feed Data Inch          
Tool EDP Diameter Shank Diameter Oal Flute Length Available Price
12310000 12301 1 1 6 3
12339370 12319 10.0mm 10.0 89 40.0
12327560 12312 7.0mm 8.0 83 30.0
12312500 12305 1/8 1/8 2-1/2 1
12331500 12315 8.0mm 8.0 83 35.0
12331250 12313 5/16 5/16 3-1/4 1-3/8
12362990 12329 16.0mm 16.0 117 65.0
12343310 12320 11.0mm 12.0 102 40.0
12347240 12323 12.0mm 12.0 102 50.0
12337500 12317 3/8 3/8 3-1/2 1-1/2
12378740 12333 20.0mm 20.0 133 80.0
12398430 12335 25.0mm 25.0 152 80.0
12325000 12311 1/4 1/4 3 1-1/4
12318750 12307 3/16 3/16 3 1-1/8
12323620 12309 6.0mm 6.0 76 30.0
12311810 12303 3.0mm 3.0 64 25.0
12335430 12316 9.0mm 10.0 89 35.0
12315750 12306 4.0mm 4.0 64 25.0
12350000 12325 1/2 1/2 4 2
12375000 12331 3/4 3/4 5-1/4 3
12362500 12327 5/8 5/8 4-5/8 2-1/2
12319680 12308 5.0mm 5.0 64 25.0
12343750 12321 7/16 7/16 4 1-3/4