TuffCut® End Mills - Series 122

Solid Carbide TuffCut® GP 4 Flute End Mill
Designed for deep pocket milling and other applications where standard flute lengths are too short.
  • 4 Flute
  • Solid carbide
  • Uncoated
  • General purpose milling of most materials
  • Center Cutting
  • Long flute lengths, square end
  • 30° Helix Angle
  • For roughing and finishing applications
  • Material Applications: Steels, Stainless Steels, Cast Iron, Special and High Temp Alloys, Hardened Steels, Non-Ferrous
       
       Speed and Feed Data Inch          
* This is a non-stock and non-returnable item
Tool EDP Diameter Shank Diameter Oal Flute Length Neck Length Available Price
12210000 12201 1 1 6 3
12211810 12203 3.0mm 3.0 64 25.0
12212500 12205 1/8 1/8 2-1/2 1
12215750 12206 4.0mm 4.0 64 25.0
12218750 12207 3/16 3/16 3 1-1/8
12219680 12208 5.0mm 5.0 64 25.0
12223620 12209 6.0mm 6.0 76 30.0
12225000 12211 1/4 1/4 3 1-1/4
12227560 12212 7.0mm 8.0 83 30.0
12231250 12213 5/16 5/16 3-1/4 1-3/8
12231500 12215 8.0mm 8.0 83 35.0
12235430 12216 9.0mm 10.0 89 35.0
12237500 12217 3/8 3/8 3-1/2 1-1/2
12239370 12219 10.0mm 10.0 89 40.0
12243310 12220 12.0mm 12.0 102 40.0
12243750 12221 7/16 7/16 4 1-3/4
12247240 12223 12.0mm 12.0 102 50.0
12250000 12225 1/2 1/2 4 2
12262500 12227 5/8 5/8 4-5/8 2-1/2
12262990 12229 16.0mm 16.0 117 65.0
12275000 12231 3/4 3/4 5-1/4 3
12278740 12233 20.0mm 20.0 133 80.0
12298430 12235 25.0mm 25.0 152 80.0