United States of America Europe
Loading
LOADING IMAGES
product photo product drawing

End Mills / 117

Solid Carbide TuffCut® GP 4 Flute End Mill, NC Tolerance
Recommended for close tolerance milling.
  • 4 Flute
  • Solid carbide
  • Uncoated
  • NC tolerances on cutting diameter - Imperial +.001" /-.000", Metric +.025mm/-.000mm
  • Cutting edge wear is decreased and tool life greatly improved
  • Center cutting
  • Standard flute lengths, square end
  • 30° Helix angle
  • For roughing and finishing applications
  • TiN and ALtima® coatings available
*This series has been obsoleted.  Tools with stock will be available until the stock is depleted and cannot be returned.  Contact customer service if you require an obsolete tool as a special.

Materials

  • Steel
  • Stainless steel
  • Cast iron
  • Non-Ferrous
  • Super-alloys and titanium
  • Hard material

Applications

  • Finishing

Series Attributes

Downloads

Product Range

Tool No. EDP Diameter (D/D1) Shank Diameter (D2) Overall Length (L1) Flute Length (L2) Neck Length (L3) Corner Radius Coating Shank Type
.0312 11703120 11703 1/32 1/8 1-1/2 5/64 Uncoated Straight
.0394 11703940 11705 1mm 3mm 38mm 3mm Uncoated Straight
.0468 11704680 11707 3/64 1/8 1-1/2 7/64 Uncoated Straight
.0625 11706250 11711 1/16 1/8 1-1/2 3/16 Uncoated Straight
.0781 11707810 11713 5/64 1/8 1-1/2 15/64 Uncoated Straight
.0787 11707870 11715 2mm 3mm 38mm 9mm Uncoated Straight
.0937 11709370 11717 3/32 1/8 1-1/2 9/32 Uncoated Straight
.0984 11709840 11719 2.5mm 3mm 38mm 12mm Uncoated Straight
.1562 11715620 11731 5/32 3/16 2 1/2 Uncoated Straight
.1772 11717720 11735 4.5mm 5mm 51mm 14mm Uncoated Straight
.1875 11718750TW 76946 3/16 3/16 2 9/16 TiN Weldon
.1968 11719680 11739 5mm 5mm 51mm 20mm Uncoated Straight
.2165 11721650 11741 5.5mm 6mm 64mm 20mm Uncoated Straight
.2187 11721870 11743 7/32 1/4 2-1/2 5/8 Uncoated Straight
.2500 11725000T 10319 1/4 1/4 2-1/2 3/4 TiN Straight
.2500 11725000TW 76947 1/4 1/4 2-1/2 3/4 TiN Weldon
.2756 11727560 11749 7mm 8mm 64mm 20mm Uncoated Straight
.2812 11728120 11751 9/32 5/16 2-1/2 3/4 Uncoated Straight
.3125 11731250TW 76949 5/16 5/16 2-1/2 13/16 TiN Weldon
.3150 11731500 11755 8mm 8mm 64mm 20mm Uncoated Straight
.3543 11735430 11757 9mm 9mm 64mm 20mm Uncoated Straight
.3750 11737500T 10328 3/8 3/8 2-1/2 7/8 TiN Straight
.3937 11739370 11761 10mm 10mm 70mm 25mm Uncoated Straight
.4331 11743310 11763 11mm 11mm 70mm 25mm Uncoated Straight
.4375 11743750 11765 7/16 7/16 2-3/4 1 Uncoated Straight
.4724 11747240 11767 12mm 12mm 76mm 25mm Uncoated Straight
.5000 11750000T 10332 1/2 1/2 3 1 TiN Straight
.5000 11750000TW 76952 1/2 1/2 3 1 TiN Weldon
.5512 11755120 11771 14mm 14mm 89mm 30mm Uncoated Straight
.7874 11778740 11783 20mm 20mm 102mm 38mm Uncoated Straight